Brace the post in place while the concrete cures. You can get some good ideas when you are looking at other fences in your neighborhood or when you are looking in home magazines. Each of the above mentioned raw materials has a different cost. As a guideline you should bury about half of the corner posts and about a third of the line post underground. Building this type of fence need not offend your neighbor, you can tell him that you are building a wire support for your shrubs. Fence Building Hold a tape measure diagonally between the one-meter mark and the 1,5-meter mark and move the string until the distance between the marks is 2-meter. Measure your post holes 8 feet apart. It’s best to keep the entire fence on your property. Prepare the tools and materials Here is a checklist of the tools and materials you will need: Boards and posts, Gravel and sand, Hammer, Hand saw, Level, Marking pencil, Nails, Paint , Post-hole digger, Power saw, Ready mixed concrete, Hatchet or small axe, Steel tape, Tamping rod, Wood chisel, Wood preservative 2. It’s a good idea to put a 30-40cm layer of gravel at the bottom of each hole before erecting the post. Fence Building If you like to have step down fence, estimate the height different from top and bottom of the hill and divide this number by number of sections.
When dealing with vinyl fence installation you need to figure out exactly where you want your posts. Mark this with a stake so you can see them. You often are allowed to have a higher back fence than sides or front etc, so you will need to know all this. Keep each stake in position allowing the concrete to dry. Fence Building And you will get the amount to step the fence down at each post. Measure out 1,5-meter out on the string and mark it. Just follow the easy instructions included with the style of fence you’ve chosen. But you should at least have 5 cm below the bottom stringer to avoid rot and to make it easier to move. This will be a guideline when you are installing the posts. Fence Building Afterwards, stretch a line in between these posts. Use a level to make sure each post is plumb and barely touching the string.
If you do it by hand, be sure it is mixed well. Be sure and measure carefully.A fence can be useful for several things like privacy, weather barrier, and containment for children or just for decoration. Fence Building Setting posts. Make sure all posts are of equal distance apart. Dig the holes about 28 inches deep. Depending on the manufacturers, fences are ready-made and can be installed. • Set your posts between 6 to 8 feet apart. Fence Building Now once you’re done with your vinyl fence installation you can sit back and enjoy your new vinyl fence. While shrubs offer a boundary line, they can still be ‘crossed’ by dogs and children alike. • Affix the fence posts by burrowing holes that are larger at the bottom.
. Once your post holes are dug, you can start assembling. Fence Building